*** All Sales Are Final ***



 

Manual Lift
This manual model lift uses a 6 ton hydraulic jack.  View Demo

 

 

Price:  $469.00       * * * Fall Clean Up SALE $419.00
Qty:



 

Air Lift
This air (pneumatic) model lifts uses a 12 ton air over hydraulic jack and works manually (by hand) or with your air compressor.  View Demo


 

Price:  $619.00       * * * Fall Clean Up SALE $569.00
Qty:



 

"NEW" Dyna Series Lift:  Manual Lift (foot pump)
This lift works with ALL Twin Cam Dyna's 1999 through present (Wide Glide, Super Glide, Low Rider, &  Dyna Sport)  without the use of any adaptors. All newer model Dynas have a 7 inch across oil tranny plate that hangs down below the frame. This simple one person operation allows you to roll the lift under the bike and lift it without having to mess with adapters.  View More Pictures of Dyna Series

ALSO works with all other Harley Davidson's and customs --- NO ADAPTORS NEEDED!!!

Price:  $469.00         * * * Fall Clean Up SALE $419.00 
Qty: 

"NEW" Dyna Series Lift: Air Lift
Same features as Manual lift except this lift works by air and/or manually by hand with a 12 ton air over hydraulic cylinder.
Price:  $619.00        * * * Fall Clean Up SALE $569.00 
Qty: 



 

NEW Pitbull Turn Table
  • Amazing NEW turn table now available for your standard manual or air Pitbull Motorcycle Lift. (Will not work with Dyna series.)
  • Rotate your motorcycle 360 degrees while up on the lift.
  • Gives you better access to your bike from all angles.
  • Allows you to position your motorcycle and place it in tighter spots in your garage while on your lift.
  • Rubberized top to aid in stability and protect the bikes frame.
  • It only adds a 1/4 inch to the Pitbull lift's overall height.
  • Replaces your existing table top, with existing bolts.
  • Turn table locks in two positions.  This rotating turn table is an extra accessory for your Pitbull lift. 

PATENT PENDING

View Demo 1
View Demo 2
View Demo 3

Watson’s MFG, LLC is in no way, shape, or form responsible for lifting your motorcycle. You as the individual take complete responsibility for lifting your motorcycle and using the Turn Table. The Pitbull Turn Table was designed to be able to turn the bike while on the lift for better positioning while cleaning or storing. This Turn Table was designed to be used with motorcycles but it will not work on all makes, models, or brands. It was originally designed for motorcycles with frames that have nothing hanging below them & do not require adapters.Please call us for ANY questions concerning the use of our lifts with the Turn Tables.

Price:  $195.00       * * * Fall Clean Up SALE $175.00
Qty:

Pitbull Logo Shop Stool
This is a 4 swivel caster  stool that has a larger seat than most and has a tool tray under the seat.  Made in the USA.  Makes clean up or working on your bike a comfortable experience. DISCONTINUED!!!!!!!!!!!! LOOKING FOR NEW COMPANY TO PRINT OUR LOGO ON  STOOL.


 

Price:  $55.00  
Qty: 



 

Pitbull Dolly Stand
This stand will allow you to free up your lift for that other bike.  It is also a great storage device for your bike.  You just raise your bike with your lift and sit it back down on the dolly stand.  It has 4 swivel casters with 2 brakes and is 21" tall. The dolly stand will NOT work on Sportsters, newer model Dressers that have a  crossmember under the frame or any metric bike that requires an adapter.


 

Price:  $175.00
Qty:


Eagle  Self Locking Wheel Chock
Drive in and walk away.  The unique design of the Eagle wheel chock cradles the front tire using the weight of the bike to firmly hold the tire.  The heavier the bike, the better it holds. 
You can load your bike without help (no more ratcheting straps to get bike vertical) 
No need to compress forks. 
Eliminate "fear" of straps coming loose and the bike falling over. 
Sate to use with virtually all custom rotor covers and fender extensions.  VIEW DEMO
Price:  $150.00  
Qty:

2 Inch Wide Ratchet Strap
PR vinyl "S" hook.  66 in long.  2500# Min. BR/EA COLORS VARY DEPENDING ON WHAT WE HAVE IN STOCK!!!!!!!!!

 

 

Price:  $32.00 per pair
Qty: 



 

1 Inch Wide Ratchet Strap
Vinyl "S" hook.  Fixed end - with built in soft tie on long end.  66 in long, 1200# Min. BR/EA COLORS VARY DEPENDING ON WHAT WE HAVE IN STOCK!!!!!!!

 

 

Price:  $25.00 per pair
Qty: 



 

Motorcycle Soft ties
1 inch, 16 inch long, 2500# MBR/EA COLORS VARY DEPENDING ON WHAT WE HAVE IN STOCK!!!!!!!!!!


 

Price:  $6.00 per pair

Color:   

Qty: 
 
Goldwing 1800 Shim Adaptor
**This adaptor is free with a purchase of a lift.
 
Price:  **$15.00
Qty: 
 
V Star 650 Shim Adaptor
**This adaptor is free with a purchase of a lift.
 
Price:  **$15.00
Qty: 
 
Other Adaptors
No Adaptors are needed for the following bikes:  Road Star 1500, Harley Davidson (Other than 88 CU.IN Dyna), Shadow 750, Goldwings, Intruders, Titans, Victory, CMC'S, After Market H-D Types, Most BMW's, Honda VTX
Price:  $39.00 Available Adaptors
Qty: 
Condor : Pit-Stop / Trailer-Stop Wheel Chock, Model PS1500
  Made out of aluminum, this is the most ultimate chock on the market by far.  You can use this in your trailer or truck bed. It snaps in and out  in just a few seconds with the quick detachable system. It will work with your front or rear tire without compressing your forks. Drive into it and get off. The bike will stay upright. This model also works great for your garage or shop.  Both chocks are fully adjustable accommodating front and rear wheel sizes from 14-22 /80-220w. you will be amazed at how secure and safe your ride will be in the Condor.
Price:  $255.00
Qty: 
Condor : Simple Wheel Chock , Model SC2000
Same great features as the Pit-stop Trailer-stop except designed for trailer use only.  Heavy Steel construction.  Powder-coated, black.  Includes all mounting hardware. It is a fully adjustable wheel locking system capable of accommodating front and rear wheel sizes from 14-22"/80-230W. The patented locking mechanism effortlessly and securely supports your motorcycle in an upright position on all transport platforms. As a Trailer Chock, it easily snaps on and off all transport platforms. Tying down the motorcycle becomes a simple one person operation. You will be amazed at how secure and safe your ride will be once tied down in the Condor® cradle. Additional Simple chocks kits and hardware available.
Price:  $170.00
Qty: 
The “LINBAR” - by Lindby Custom, Inc
The original patented combined engine guard & highway peg.  Available for most model bikes in cruiser / dresser lines.  Also available: front bar, rear bar, & Twin bars.
Call toll free 888-299-9325 to order the model number to fit your specific bike.



WINDSHIELDS to fit your Harley Davidson FLHT
Pre-formed to fit your fairing.  D.O.T Approved, laser-Cut w/ slight bevel, no sharp edges.
Price ranges between $55-$65 depending on size plus shipping
***** CALL TOLL FREE TO ORDER 888-299-9325  *******
Color Choice Sizes Available Fits
Dark Tinted
Lite Tint
Clear
6 Inch
8 inch 10 inch
12 inch - (Available only in clear)
1996 to present  ( 3 hole)
1995 and earlier ( 5 hole)

Rivco Air Horns:
Extremely loud 128 decibels, Will let people know you are there! These are top of the line, high quality Air horns. They are triple chrome plated and add style to any bike. All air horn sets are bolt on & plug in requiring about 30 minutes to install. They include the horn set, dust / bug covers, all necessary hardware, hoses, wiring, fuse, relay, and detailed instructions with pictures. Made in the USA.( not a china knock off). Due to the differences in motorcycle models
there are different horn model numbers per bike type or model so, you will need to call us toll free at 888-299-9325 to place your order. This way we can make sure you get the right horn for your bike. $160 plus $10 shipping 


T-Shirt Front Logo
 

NEW Pitbull T-Shirt
The T-Shirt comes in the following sizes: L, XL, and XXL.

Front:
T-Shirt Front

Back:
T-Shirt Back

Price:  $10.00
Qty:
Size:


Pit Bull Motorcycle Lifts   1-888-299-9325  
jeff@pitbullmotorcyclelifts.com