SHADOW ACE AND 750 ACE (750 ACE ONLY NEEDS 1\2 SHIMS)
SHADOW SPRINT / TOURER / VT1100 / SABER (2007 SABRE MODELS WORK ON DYNA LIFT-OR VICTORY SHIMS ON STD. LIFTS)
SHADOW AMERICAN CLASSIC
SHADOW AERO 1100
SHADOW 600 (THIS BIKES FRAME ON THE LEFT SIDE IS HIGHER THAN THE RIGHT, IT TAKES A SINGLE PLATE ADAPTER FOR THE LEFT SIDE TO GET THE BIKE UP LEVEL, USE CARE TO MAKE SURE THIS ADAPTOR IS ON AND POSITIONED CORRECTLY BEFORE USE.)
VULCAN 1500\ 1600 NOMAD (WILL WORK ON DYNA LIFT)
VULCAN 1500 \1600 CLASSIC (WILL WORK ON DYNA LIFT)
VULCAN DRIFTER 1500 (WILL WORK ON DYNA LIFT)
VULCAN 800
ROYAL STAR & VENTURE ROYAL (MUST KNOW YEAR OF BIKE)
V-STAR 1100 (WILL WORK ON DYNA BUT NEED SHIMS IN FRONT)
V-STAR 650 (WILL WORK ON DYNA LIFT)
MAGNA V45 & V65 SABER
MAGNA 750
VALKYRIE REGULAR (STANDARD)
VALKYRIE TOUR & CLASSIC
GOLDWING 1800 (NOT NEEDED WITH BELLY PAN)
BMW K1200LT (NO ADAPTOR = MUST USE BOARD UNDER ENGINE TO KEEP FROM HITTING THE EXHAUST MANIFOLD PIPES ON THE LEFT SIDE OF BIKE, ALSO MUST REMOVE SKID BAR BACK BY CENTERSTAND AND ANY PLASTIC HANGING DOWN IF THE BOARD DOESN’T SHIM UP PAST THIS.)
BMW R1200C (THIS BIKE DOES NOT HAVE CENTERSTAND, NEEDS SINGLE ADAPTOR PLATE THAT COMES UP & MAKES CONTACT WITH THE BOTTOM OF THE TRANNY )

TRIKES AND TRI GLIDES

TRIUMPH - ROCKET 111
HONDA RUNE
SPORT BIKES- ALL
SUZUKI SAVAGE
HONDA ST 1300 & ST 1100
CHAMPION TRIKE CONVERSIONS (TO HEAVY TO LIFT)
BMW R1200RT
ANY BOSS HOSS

RAILS ON THE STANDARD LIFT
DESIGNED AND ENGINEERED TO
BE THE STRONGEST, MOST STABLE
LIFT ON THE MARKET.

PRECISION 4” CASTERS
WITH ROLLER BEARINGS AND
GREASE FITTINGS. ROLLS EASILY,
EVEN WHEN LOADED.

RAILS ON DYNA LIFT
DESIGNED TO WORK ON ALL TWIN CAM DYNAS WITH NO ADAPTERS NEEDED!

LIFETIME WARRNATY
TOTAL WEIGHT IS 117 LBS. POWDER
COATED. 100% MIG WELDED.
FULL 25” LIFT HEIGHT

SPRING LOADED HANDLE
SIMPLE ONE PERSON OPERATION
DESIGNED TO LAST A LIFETIME

TRIPLE SAFETY LOCKS
FOR YOU AND YOUR BIKE’S SAFETY

OUR MOTORCYCLE LIFTS ARE DESIGNED BY BIKERS FOR BIKERS WITH YOU AND YOUR BIKE'S SAFETY IN MIND. OUR LIFTS ARE QUALITY CRAFTED BY SKILLED CRAFTSMEN RIGHT HERE IN THE USA.

THIS AIR (PNEUMATIC) MODEL LIFT USES A 12 TON AIR OVER HYDRAULIC JACK AND WORKS MANUALLY (BY HAND) OR WITH YOUR AIR COMPRESSOR.

WORKS WITH ALL TWIN CAM DYNA'S 1999 THROUGH PRESENT (WIDE GLIDE, SUPER GLIDE, LOW RIDER, & DYNA SPORT) WITHOUT THE USE OF ADAPTORS. ALSO WORKS WITH ALL OTHER HARLEY DAVIDSON'S AND CUSTOMS --- NO ADAPTORS NEEDED!!!

ROTATE YOUR MOTORCYCLE 360 DEGREES WHILE UP ON THE LIFT. GIVES YOU BETTER ACCESS TO YOUR BIKE FROM ALL ANGLES. ALLOWS YOU TO POSITION YOUR MOTORCYCLE AND PLACE IT IN TIGHTER SPOTS IN YOUR GARAGE WHILE ON YOUR LIFT. RUBBERIZED TOP TO AID IN STABILITY AND PROTECT THE BIKES FRAME. REPLACES YOUR EXISTING TABLE TOP, WITH EXISTING BOLTS. TURN TABLE LOCKS IN TWO POSITIONS. IMPORTANT: THE TURNTABLE DEOS NOT WORK WITH THE "DYNA" SERIES LIFT. IT ALSO ADS 1/4 INCH TO THE PLATFORM OF YOUR PITBULL LIFT WHICH MAKES THE TOTAL CLEARANCE OF THE LIFT WITH THE TURNTABLE 4 3/4 INCH

THIS STAND WILL ALLOW YOU TO FREE UP YOUR LIFT FOR THAT OTHER BIKE. IT IS ALSO A GREAT STORAGE DEVICE FOR YOUR BIKE. YOU JUST RAISE YOUR BIKE WITH YOUR LIFT AND SIT IT BACK DOWN ON THE DOLLY STAND. IT HAS 4 SWIVEL CASTERS WITH 2 BRAKES AND IS 21" TALL. THE DOLLY STAND DOES NOT WORK WITH ALL MAKES AND MODEL BIKES. GIV E US A CALL TODAY WITH YOUR MAKE AND MODEL. 731-644-7432.